← Sales Orders
SO-2026-0130
Fulfilled Complete1× Elite 1x · Mould 148 · 80–90kg
$12,800.00
ex-GST · $14,080.00 inc GST
Ordered
12 Mar 2026
Terms 30 EOM
Due
08 May 2026
Priya Anand
Invoice (Xero)
INV-10718
30% deposit
Bill of materials
19 lines| Component | Qty | On hand | Line cost |
|---|---|---|---|
| RAW-CF-400T Carbon cloth 400gsm twill (hull skin) | 4 m² | 58 | $456.00 |
| RAW-CF-200T Carbon cloth 200gsm 2×2 twill (1.27m) | 3 m² | 86 | $205.50 |
| RAW-CF-UD300 Carbon UD 300gsm tape | 1.5 m² | 142 | $138.00 |
| RAW-HC-NMX Nomex honeycomb core 6mm | 2.3 m² | 31 | $427.80 |
| RAW-RESIN-EP Epoxy laminating resin (Part A) | 4.6 kg | 96 | $135.70 |
| RAW-HARD-EP Epoxy hardener (Part B) | 1.5 kg | 38 | $61.50 |
| RAW-GEL-WHT Gelcoat — White | 1 kg | 44 | $34.50 |
| RAW-PEEL Peel ply 80gsm | 3.8 m² | 210 | $18.24 |
| RAW-BOND Structural bonding paste 50ml | 2 each | 64 | $39.60 |
| RIG-WING Sykes Wing Rigger | 1 each | 22 | $836.00 |
| SEAT-SYS Seat Systems Set | 1 set | 19 | $330.00 |
| FS-ASSY Foot Stretcher (complete) | 1 each | 24 | $412.50 |
| RIG-PIN-SET Pin Sets (excl. oarlock) | 1 set | 26 | $110.00 |
| RIG-BACK-SET Backarm Sets | 1 set | 12 | $220.00 |
| OAR-C2-13 C2 Scull Oarlock 13mm (w/ bushings) | 2 each | 64 | $66.00 |
| HF-BUNG Bung Rubber | 1 each | 96 | $33.00 |
| HF-VENT Vent Screw | 1 each | 120 | $5.00 |
| FX-TUBE-S Martinoli tubenut short 6×40 (10pk) | 1 pack | 14 | $120.00 |
| FX-WASH-M6 Washer M6 (20pk) | 1 pack | 60 | $11.00 |
Build margin
Indicative — materials at standard cost + shop labour.
- Revenue (ex-GST)
- $12,800.00
- Materials
- −$3,660.34
- Labour
- −$7,030.00
- Gross margin
- $2,109.66
16.5%
gross margin on this build