← Sales Orders
SO-2026-0140
Fulfilled Complete1× Classic 2x Double · Mould 213 · 70–85kg
$16,500.00
ex-GST · $18,150.00 inc GST
Ordered
04 Apr 2026
Terms 30 EOM
Due
30 May 2026
Jen Halloran
Invoice (Xero)
INV-10750
30% deposit
Bill of materials
19 lines| Component | Qty | On hand | Line cost |
|---|---|---|---|
| RAW-CF-400T Carbon cloth 400gsm twill (hull skin) | 5.9 m² | 58 | $672.60 |
| RAW-CF-200T Carbon cloth 200gsm 2×2 twill (1.27m) | 4.5 m² | 86 | $308.25 |
| RAW-CF-UD300 Carbon UD 300gsm tape | 2.2 m² | 142 | $202.40 |
| RAW-HC-NMX Nomex honeycomb core 6mm | 3.4 m² | 31 | $632.40 |
| RAW-RESIN-EP Epoxy laminating resin (Part A) | 6.7 kg | 96 | $197.65 |
| RAW-HARD-EP Epoxy hardener (Part B) | 2.2 kg | 38 | $90.20 |
| RAW-GEL-YEL Gelcoat — Sykes Yellow | 1.4 kg | 9 | $51.10 |
| RAW-PEEL Peel ply 80gsm | 5.6 m² | 210 | $26.88 |
| RAW-BOND Structural bonding paste 50ml | 3 each | 64 | $59.40 |
| RIG-WING Sykes Wing Rigger | 2 each | 22 | $1,672.00 |
| SEAT-SYS Seat Systems Set | 2 set | 19 | $660.00 |
| FS-ASSY Foot Stretcher (complete) | 2 each | 24 | $825.00 |
| RIG-PIN-SET Pin Sets (excl. oarlock) | 2 set | 26 | $220.00 |
| RIG-BACK-SET Backarm Sets | 2 set | 12 | $440.00 |
| OAR-C2-13 C2 Scull Oarlock 13mm (w/ bushings) | 4 each | 64 | $132.00 |
| HF-BUNG Bung Rubber | 1 each | 96 | $33.00 |
| HF-VENT Vent Screw | 1 each | 120 | $5.00 |
| FX-TUBE-S Martinoli tubenut short 6×40 (10pk) | 1 pack | 14 | $120.00 |
| FX-WASH-M6 Washer M6 (20pk) | 1 pack | 60 | $11.00 |
Build margin
Indicative — materials at standard cost + shop labour.
- Revenue (ex-GST)
- $16,500.00
- Materials
- −$6,358.88
- Labour
- −$10,260.00
- Gross margin
- -$118.88
-0.7%
gross margin on this build