← Sales Orders

SO-2026-0146

In Production Fit-out

6× Initiator 1x · Mould 150 · 55–70kg

$47,400.00

ex-GST · $52,140.00 inc GST

Customer

Rowing Australia

Yarralumla, ACT

Ordered

22 Apr 2026

Terms NET 30

Due

10 July 2026

Priya Anand

Deposit / balance

$14,220 / $33,180

30% deposit

Note: Rowing Australia small-boat training fleet

Work orders · 6 hulls

Production board →
  • SYK-150-01461 WO-0146-1
    Fit-out
  • SYK-150-01462 WO-0146-2
    Layup
  • SYK-150-01463 WO-0146-3
    Cure
  • SYK-150-01464 WO-0146-4
    Layup
  • SYK-150-01465 WO-0146-5
    Layup
  • SYK-150-01466 WO-0146-6
    Layup

Production stage

Layup
Cure
3 Fit-out
4 Finishing
5 QC
6 Complete

Bill of materials (×6)

19 lines
ComponentQtyOn handLine cost
RAW-CF-400T Carbon cloth 400gsm twill (hull skin) 24 m² 58 $2,736.00
RAW-CF-200T Carbon cloth 200gsm 2×2 twill (1.27m) 18 m² 86 $1,233.00
RAW-CF-UD300 Carbon UD 300gsm tape 9 m² 142 $828.00
RAW-HC-NMX Nomex honeycomb core 6mm 13.8 m² 31 $2,566.80
RAW-RESIN-EP Epoxy laminating resin (Part A) 27.6 kg 96 $814.20
RAW-HARD-EP Epoxy hardener (Part B) 9 kg 38 $369.00
RAW-GEL-YEL Gelcoat — Sykes Yellow 6 kg 9 $219.00
RAW-PEEL Peel ply 80gsm 22.8 m² 210 $109.44
RAW-BOND Structural bonding paste 50ml 12 each 64 $237.60
RIG-WING Sykes Wing Rigger 6 each 22 $5,016.00
SEAT-SYS Seat Systems Set 6 set 19 $1,980.00
FS-ASSY Foot Stretcher (complete) 6 each 24 $2,475.00
RIG-PIN-SET Pin Sets (excl. oarlock) 6 set 26 $660.00
RIG-BACK-SET Backarm Sets 6 set 12 $1,320.00
OAR-C2-13 C2 Scull Oarlock 13mm (w/ bushings) 12 each 64 $396.00
HF-BUNG Bung Rubber 6 each 96 $198.00
HF-VENT Vent Screw 6 each 120 $30.00
FX-TUBE-S Martinoli tubenut short 6×40 (10pk) 6 pack 14 $720.00
FX-WASH-M6 Washer M6 (20pk) 6 pack 60 $66.00

Build margin

Indicative — materials at standard cost + shop labour.

Revenue (ex-GST)
$47,400.00
Materials
−$21,974.04
Labour
−$42,180.00
Gross margin
-$16,754.04

-35.3%

gross margin on this build