← Sales Orders
SO-2026-0151
In Production Cure1× Classic 8+ · Mould 501 · Crew avg 80–92kg
$52,000.00
ex-GST · $57,200.00 inc GST
Ordered
12 May 2026
Terms NET 30
Due
01 Aug 2026
Dale Whitcroft
Deposit / balance
$20,800 / $31,200
40% deposit
Note: GPS schoolboy eight
Work orders · 1 hull
Production board →- SYK-501-01511 WO-0151-1Dale Whitcroft Cure
Production stage
✓ Layup
2 Cure
3 Fit-out
4 Finishing
5 QC
6 Complete
Bill of materials
19 lines| Component | Qty | On hand | Line cost |
|---|---|---|---|
| RAW-CF-400T Carbon cloth 400gsm twill (hull skin) | 17.2 m² | 58 | $1,960.80 |
| RAW-CF-200T Carbon cloth 200gsm 2×2 twill (1.27m) | 13.1 m² | 86 | $897.35 |
| RAW-CF-UD300 Carbon UD 300gsm tape | 6.6 m² | 142 | $607.20 |
| RAW-HC-NMX Nomex honeycomb core 6mm | 9.8 m² | 31 | $1,822.80 |
| RAW-RESIN-EP Epoxy laminating resin (Part A) | 19.7 kg | 96 | $581.15 |
| RAW-HARD-EP Epoxy hardener (Part B) | 6.6 kg | 38 | $270.60 |
| RAW-GEL-YEL Gelcoat — Sykes Yellow | 4.1 kg | 9 | $149.65 |
| RAW-PEEL Peel ply 80gsm | 16.4 m² | 210 | $78.72 |
| RAW-BOND Structural bonding paste 50ml | 9 each | 64 | $178.20 |
| RIG-WING Sykes Wing Rigger | 8 each | 22 | $6,688.00 |
| SEAT-SYS Seat Systems Set | 8 set | 19 | $2,640.00 |
| FS-ASSY Foot Stretcher (complete) | 8 each | 24 | $3,300.00 |
| RIG-PIN-SET Pin Sets (excl. oarlock) | 8 set | 26 | $880.00 |
| RIG-BACK-SET Backarm Sets | 8 set | 12 | $1,760.00 |
| OAR-C2-SWEEP C2 Sweep Oarlock | 8 each | 38 | $312.00 |
| HF-BUNG Bung Rubber | 2 each | 96 | $66.00 |
| HF-VENT Vent Screw | 2 each | 120 | $10.00 |
| FX-TUBE-S Martinoli tubenut short 6×40 (10pk) | 1 pack | 14 | $120.00 |
| FX-WASH-M6 Washer M6 (20pk) | 1 pack | 60 | $11.00 |
Build margin
Indicative — materials at standard cost + shop labour.
- Revenue (ex-GST)
- $52,000.00
- Materials
- −$22,333.47
- Labour
- −$29,640.00
- Gross margin
- $26.53
0.1%
gross margin on this build