← Sales Orders
SO-2026-0159
In Production Finishing3× Initiator 1x · Mould 150 · 55–70kg
$23,700.00
ex-GST · $26,070.00 inc GST
Ordered
28 May 2026
Terms NET 30
Due
02 July 2026
Priya Anand
Deposit / balance
$7,110 / $16,590
30% deposit
Note: School squad top-up
Work orders · 3 hulls
Production board →- SYK-150-01591 WO-0159-1Priya Anand Finishing
- SYK-150-01592 WO-0159-2Priya Anand Fit-out
- SYK-150-01593 WO-0159-3Priya Anand Cure
Production stage
✓ Layup
✓ Cure
✓ Fit-out
4 Finishing
5 QC
6 Complete
Bill of materials (×3)
19 lines| Component | Qty | On hand | Line cost |
|---|---|---|---|
| RAW-CF-400T Carbon cloth 400gsm twill (hull skin) | 12 m² | 58 | $1,368.00 |
| RAW-CF-200T Carbon cloth 200gsm 2×2 twill (1.27m) | 9 m² | 86 | $616.50 |
| RAW-CF-UD300 Carbon UD 300gsm tape | 4.5 m² | 142 | $414.00 |
| RAW-HC-NMX Nomex honeycomb core 6mm | 6.9 m² | 31 | $1,283.40 |
| RAW-RESIN-EP Epoxy laminating resin (Part A) | 13.8 kg | 96 | $407.10 |
| RAW-HARD-EP Epoxy hardener (Part B) | 4.5 kg | 38 | $184.50 |
| RAW-GEL-YEL Gelcoat — Sykes Yellow | 3 kg | 9 | $109.50 |
| RAW-PEEL Peel ply 80gsm | 11.4 m² | 210 | $54.72 |
| RAW-BOND Structural bonding paste 50ml | 6 each | 64 | $118.80 |
| RIG-WING Sykes Wing Rigger | 3 each | 22 | $2,508.00 |
| SEAT-SYS Seat Systems Set | 3 set | 19 | $990.00 |
| FS-ASSY Foot Stretcher (complete) | 3 each | 24 | $1,237.50 |
| RIG-PIN-SET Pin Sets (excl. oarlock) | 3 set | 26 | $330.00 |
| RIG-BACK-SET Backarm Sets | 3 set | 12 | $660.00 |
| OAR-C2-13 C2 Scull Oarlock 13mm (w/ bushings) | 6 each | 64 | $198.00 |
| HF-BUNG Bung Rubber | 3 each | 96 | $99.00 |
| HF-VENT Vent Screw | 3 each | 120 | $15.00 |
| FX-TUBE-S Martinoli tubenut short 6×40 (10pk) | 3 pack | 14 | $360.00 |
| FX-WASH-M6 Washer M6 (20pk) | 3 pack | 60 | $33.00 |
Build margin
Indicative — materials at standard cost + shop labour.
- Revenue (ex-GST)
- $23,700.00
- Materials
- −$10,987.02
- Labour
- −$21,090.00
- Gross margin
- -$8,377.02
-35.3%
gross margin on this build